Email: info@bekamorbit.com | Phone: 0720 886 696 / 0724 134 701
Call To 0720 886 696

304 Stainless Steel Emergency Eyewash Station Kenya | Pedal Activated

KShs23,500.00

304 stainless steel emergency eyewash station for Kenyan workplaces—dual spray heads with filters, fast ball-valve control, and hands-free pedal activation for rapid eye/face flushing.

304 stainless steel emergency eyewash station Kenya

A 304 stainless steel emergency eyewash station Kenya workplaces can rely on is a critical first-response safety unit for chemical splashes, dust, paint, fuel, acids, and alkalis. This vertical, pedestal-mounted eyewash is built for harsh industrial conditions—multiple polished 304 stainless steel surfaces resist rust and corrosion while helping keep rinse water cleaner for emergency use.

Designed for factories, labs, workshops, pharmaceutical handling, printing/dyeing, automotive, and general industrial sites across Kenya, this unit delivers rapid, stable eye/face flushing when seconds matter.

Fast, Reliable Emergency Activation

This model uses a ball valve control that opens quickly and provides strong airtightness—helping water discharge rapidly for immediate flushing. The hands-free foot pedal lets the injured person activate the eyewash even when their hands are contaminated or in pain.

Hands-free Pedal Operation

  • Step on the pedal to start the eyewash flow

  • Nozzle dust covers open automatically during use

  • After use, close the switch and reset the dust covers

Dual Spray Heads with Built-in Filtration

The double spray heads include a multi-layer filter screen that helps reduce impurities and creates a foamy water column. This controlled, comfortable flow helps minimize the risk of secondary irritation caused by debris or excessive pressure.

Easy Maintenance

  • The filter screen is removable

  • Simple to clean and reinstall

  • Designed for long-term reliability in industrial sites

Key Parameters

  • Material: Thick 304 stainless steel + ABS coating

  • Sealing pressure: 0.4 MPa

  • Working pressure: 0.2–0.4 MPa

  • Spray flow: 120–180 L/min (system spec)

  • Temperature note: Suitable for environments above 0°C (insulate/anti-freeze piping if colder)

Installation Guidance for Kenyan Worksites

For best compliance and usability:

  1. Install within 15 meters of the hazard area (reach within ~10 seconds).

  2. Use sealing tape on threaded connections before joining pipes.

  3. After connecting the inlet/outlet, confirm the ball valve operates smoothly with no jamming.

How to Use (Emergency Steps)

  1. Open the water inlet control valve.

  2. Activate eyewash (pedal/board depending on your installation).

  3. Rinse eyes/face thoroughly and seek medical support as required.

You cannot copy content of this page

Cart

Your Cart is Empty

Back To Shop